Brewery And Beverages Testing Equipment

Product Price :Get Latest Price

The “CanNeed-SST-3 Secure Seal Tester” is used to test the seal integrity on the glass or plastic containers and cans. The CanNeed -SST-3 has been designed to address the special needs of sealing cans and bottles that use aluminium roll-on, twist crowns, or plastic caps. The CND-SST-3 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive and accurate readings.

CanNeed-SST-3 is made from anodized aluminium, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use.

Standards of Qualified Sealing Integrity

PET bottled beverage without gas, such as                :        0.2 Mpa

Mineral water or tea beverage

PET bottled beverage with gas, such as Cola             :        1.0 Mpa

Glass bottle-Crown cap, such as beer                        :        1.0 Mpa

Glass bottle-Plastic cap and Aluminium                    :        0.2 Mpa

twit-off cap, such as sauce and spirit

Canned food or Canned beverage                             :        0.2 Mpa

Product Price :Get Latest Price

The “CanNeed DER-4 Digital Enamel Rater” can detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability.

The film coated buttons are more durable and with better corrosion resistance.

DER-4 is the industry standard. The new CanNeed Enamel Rater DER-4 instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.

Product Price :Get Latest Price

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’

shapes.

CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.

New Attributes:

● With a more wearable probe

● More sizes of magnetic balls: 5.00mm and 7.00mm

● Larger measuring range: up to 25.4mm

● Larger color screen, larger letters

● RS-232 output

● Display the real time thickness readings and automatically capture maximum

value, minimum value and average value.

● Rapid measurement, up to 16 times per second

● Accuracy: ±1%

● It stores 95,000 thickness readings as the internal data record

● Save the calibration file and allocate the calibration file saved.

● New machine appearance design

● New extensive calibration package to measure the thickness up to 25.4mm

● With strip-graphic view of statistical data

Product Price :Get Latest Price

The “CanNeed-TT-200 Digital Torque Tester” are specially designed for testing the cap closing and opening torque value of the bottled products. Its excellent performance makes it the industrial standard. The clients can also choose the measuring software by orders.

SPECIFICATIONS:

Ø Measuring range A : from 00.00 to 99.00 inch.Lbs

Ø In High-accuracy mode: from 0.000 to 4.500 inch.Lbs

Ø Accuracy:± 0.5 % of the full scale

Ø Units available : Kgf.cm / Inch.lbs / daN.cm / N.cm / N.m

Ø Memorization of 4 thresholds : very low; low; high; very high who permit to detect and display

Ø Message of quality in relation with the detected torque ( visualization on bar-graph )

Ø Set the file with administrator password

Ø Measures in screwing and unscrewing.( opening and closing )

Ø Memorization of 1000 measuring results (able to be output)

Ø Over large touching screen to operate and display

Ø Batteries are chooseable

Ø Three (3) measuring modes (Common, Peak Value, Peak Value + Memo)

Ø Print the measuring results and statistics (hour + date)

Ø 2 RS outputs (computer – printer)

Ø 30 products can be memorized

Ø Analog output

Ø The clients can also choose the measuring software by orders.

Ø Display: the products, the operator, lot number, production line number

Ø The clients can also choose the mini printer by orders.

Ø Dynamic visualization: statistics, hour, date

Ø Stainless steel design / IP 64 Protection

Ø Other display statistics and defined display

Ø Choice of the languages: Chinese, English

Ø Measuring platform: food industry / Cosmetic industry

Ø Power: 220V, 50Hz

Product Price :Get Latest Price

AUTOMATED PART:

This machine has for rule to realize controls of torques in laboratory or near the

bottling line making total abstraction of the human factor during the measure. The operator has for rule only to put down the sample on the machine and press the start button.

Test Cycle:

Ø Tightening of the bottle automated

Ø descent of the head of unscrewing in adjustable pressure

Ø tightening of the cap in the crowbar (or special head)

Ø automatic Reset

Ø unscrewing up to programmed angle

Ø validation of the value of the torque of releasing

Ø Opening of the crowbar (if used)

Ø climb of the head

Ø opening of the chuck automatic.

FOR ALL THE CYCLES:

Ø validation of the torque = sending on software and printing.

Ø IT'S possible to set differents speeds for screwing and unscrewing.

Ø Transfer of the measures by RS 232 C output (standard) or by software (option )

Ø Angle of rotation programmable

Ø Treatments of the measures on mini-printer and statistics

Ø Certificate of calibration with bill of the weights in LNE = ATSM

Ø Speed of rotation: IMPORTANT: FROM 0,8 TO 8,5 OR 0,08 to 100 rpm maximum to be confirmed to us ( servo motor option ).

Technical data:

Ø Measuring range A : from 00.00 to 99.99Kgf.cm / 9.999 N.m

Ø 0.050 to 3.999 Kgf.cm (in " accuracy " mode ) and 0.001 to 2.999 on request

Ø Accuracy : 0,2 % of the full scale

Ø 2 RS 232 C outputs : printing of the values and invoice of the values in the same time to SPC system.

Ø Units available : Kgf.cm / Inch.lbs / daN.cm / N.cm / N.m

Product Price :Get Latest Price

1) Three (3) international commonly used testing methods: Fill Ramp mode, Burst mode, User-defined mode

2) Touch-screen controlled, display the real-time testing data

3) During the testing, CND-PEBT software can display the curve of pressure and volume expansion, and provide the relevant temperature data.

4) No need for high-pressure air supply.

The “CanNeed-PEBT-4000 PET Bottle Pressure Tester” is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three international commonly used testing methods. Users can select the testing method according to their requirement. CanNeed -PEBT-4000 is able to test the pressure capabilities that under a set pressure or the burst test.

Product Price :Get Latest Price

The “CanNeed-HWC-100 Hot Wire Bottle Cutter” offers an easy-to-use and cost-effective method for cutting containers for section weight analysis. It can cut PET bottle into several determined sections (The maximum is up to 5 sections). Then, the user can check whether each section accord with the corresponding weight standard. CanNeed-HWC-100 can quickly cut PET bottle with hot wires. Clear profiles can be obtained without PET deformation. PET bottle samples can be 200-3000 ml.

Prepares bottles for section weight analysis.

PET bottle samples of 200ml to 2,000ml are cut in 4 predetemined portions, Each bottle portion are checked to ensure that they comply to the exact weight assignment

Effective method for section weight analysis

* Cut in maximum 5 predetermined sections

* Precise cutting

* No need to wait for heating

* Energy saving

* Very durable

Technical Data:

Bottle Capacity:

Length up to 483mm

Diameter up to 157mm

Finished Inner Diameter: 12.7mm – 53.3mm

Machine Dimensions: 599mm L. x 635mm W. x 178mm H.

Weight: 20 KG

Power: 220 VAC @ 50 Hz (Optional Voltage 115 VAC @ 50/60 Hz )