Send Email
0804896613361% Response Rate
Search
Electronic Analytical Balance
Offering you a complete choice of products which include ap135w analytical balance, ap125wd analytical balance, ap225wd analytical balance, ap124w analytical balance, ap224w analytical balance and ap324w analytical balance.AP135W Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 135 g |
| Pan Size | 91 mm |
| Response Time | 8 sec |
| Repeatability | 0.05 mg |
| Linearity | +/-0.1 mg |
| Weight | 7.9 Kg |
| Minimum Display | 0.01 mg |
| External Calibration Weight Range for Span Calibration | 45 to 135.0009 g (100 g) |
| Repeatability Low Loads | 0.015 mg (5 g low loads |
| Minimum Weight | 30 mg |
| Response Time for Trace Measurements | 2 sec |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD411xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
Shimadzu analytical balances boast a one-piece UniBloc weighing sensor, which is now even more advanced. The response time is reduced to about 1/5 the time of previous models. The improved UniBloc sensor offers a response time of just 2 seconds, an improvement from 10 seconds with the previous model.
Solutions to Improve Operational Efficiency and Ensure Data Reliability LabSolutions Balance
- Eliminate manual entry, and all the weighing data are saved automatically in a safe database without transcription mistakes.
- Reports appropriate for weighing methods, such as the mass variation test, drying weight loss test and particle size test, can be created automatically after the measurement. In addition,customized reports featuring such information as system conformance, content uniformity and elution tests together with the analysis results obtained by HPLC, etc. can be created.
Compliant with the Latest Data Integrity Guidance
- Weighing results can be automatically saved in the database together with other information, including sample ID, operator name, operation date and series number of instrument used.This enables quick data searching based on sample information.
- It allows setting up user authority to ensure only the authorized user can create a template for weighing.
- It prevents improper manipulation, unintended overwriting and deletion of data. In addition,measurement results, all the operation histories and reasons will be saved in the database as log files.
The pH level of mobile phase (eluent) solutions used in liquid chromatographs is adjusted to improve separation of components and extend the life of columns. This pH adjustment process is performed using a buffer solution. Currently, the most common method is using a pH meter to measure the pH as the solution is prepared; however, this process requires considerable time and effort, which can cause operational bottlenecks.An alternative method does not require a pH meter. It involves preparing solutions by weighing fixed theoretically calculated quantities of an acid and base.AP series supports weighing these acids and bases. If the type and quantity of the buffer solution are specified, the balance displays the type and quantity of sample that should be weighed. Then the buffer solution can be prepared easily by adding water to the specified quantity of sample weighed accordingly.
Display capture function
Weighing display can be recorded into USB memory in BMP format. User name, date/time, and setting can be shown with display information.The user name, time, measurement conditions, pass/fail judgments, and other information displayed on screen can be saved as is, enabling the recording of measurements, and checks after measurements.
Numeric keypad
Connecting a common external numeric keypad makes it easier to enter numeric values. This is especially useful for entering the mass value of weights, setting upper/lower limit values for the comparator function, or entering the sample count during piece counting mode.
Yes! I am Interested
AP125WD Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 120 g / 52 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg / 0.02 mg |
| Linearity | +/-0.2 mg /+/-0.05 mg |
| Weight | 7.9 Kg |
| Minimum Display | 0.01 mg |
| External Calibration Weight Range for Span Calibration | 45 to 120.0090 g (100 g) |
| Repeatability Low Loads | 0.015 mg (5 g low loads) |
| Minimum Weight | 30 mg |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD411xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of AP125WD Analytical Balance
Yes! I am Interested
AP225WD Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Repeatability | 0.1 mg / 0.05 mg |
| Linearity | +/-0.2 mg /+/-0.1 mg |
| Capacity | 220 g / 102 g |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 220.0090 g (200 g) |
| Repeatability Low Loads | 0.015 mg (5 g low loads) |
| Minimum Weight | 30 mg |
| Response Time for Trace Measurements | 2 sec |
| Reponse Time | 8 sec |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Pan Size | 91 mm |
| Body Dimensions | W212xD411xH345 mm |
| Weight | 7.9 Kg |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of AP225WD Analytical Balance
Yes! I am Interested
AP124W Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 120 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg |
| Linearity | +/-0.2 mg |
| Weight | 7.0 Kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 45 to 120.009 g (100 g) |
| Minimum Weight | 200 mg |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimension | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of AP124W Analytical Balance
Yes! I am Interested
AP224W Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 220 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg |
| Linearity | +/-0.2 mg |
| Weight | 7.0 Kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 220.009 g (200 g) |
| Minimum Weight | 200 mg |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofAP224W Analytical Balance
Yes! I am Interested
AP324W Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 320 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.15 mg (Standard deviation) |
| Linearity | +/-0.3 mg |
| Weight | 7.0 Kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 320.009 g (300 g) |
| Repeatability Low Loads | 0.1 mg (20 g low loads |
| Minimum Weight | 200 mg |
| USB Host | Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofAP324W Analytical Balance
Yes! I am Interested
AT Series Unibloc Electronic Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Minimum Display | 0.1mg |
| Repeatability | Less than equal 0.1mg (Standard Deviation) |
| Linearity | +/- 0.2mg |
| Stabilisation Time | Approx. 3.0 seconds |
| Operating Temperature | -5-40 Deg C |
| Humidity Range | 20 to 85% RH |
| Temperature Coefficient for Sensitivity | +/- 2 ppm/ Deg C (10-30 Deg C) |
| Pan Size | 91 mm |
| Main Body Dimensions | W213xD356xH338 mm |
| Weight | 6.0-6.2 Kg |
| Power Requrement | 12V, 1A |
The ATX/ATY series incorporates a one-piece aluminum alloy mass sensor technology (UniBloc), first introduced by Shimadzu for precision balances in 1989. It excels in performance, and resists deterioration and damage by ordinary impacts. The UniBloc's compact, uniform structure replaces 70 parts found in a conventional electromagnetic balance sensor assembly
and ensures stable temperature characteristics, excellent response time and stable corner-load performance.The UniBloc design permits a consistency of production that assures reliability and a long operational life.
Touch-key Calibration
- Automated calibration can be started by pressing keys. (ATX series)Also, your external calibration weights can be used for span calibration.(All models)
Easy Setting Best fit to weighing application
- Quickly adjust the desired ratio of stability and response for every application, even during measurement, with one-touch operation.
Calibration record
- You can leave a record of execution of calibration. With serial number and ID of balance.
Large pan size
- This model has the largest weighing pan in the class (91mm diameter).
Multiple weighing units
- In addition to grams (g), weigh in ct, mg, oz, etc. or a custom conversion units.
Expanded Piece Counting Function
- Unit weights of up to 5 different samples can be easily entered, stored and recalled for use.
Formulation Mode
- Convenient for making many measurements of minute samples and seeking the total mass.
% measurement
- The weight of the sample is converted to a percentage of the reference weight.
Power saving function
- When weighing operation ends. Power automatically turns off after a fixed or pre-set time
WindowsDirect Communication Function
- Send balance data to Excel or other Windows applications without any data communication software installation required. By combining standard AutoPrint functions with typical spreadsheet functions, even difficult applications can be easily automated.
Password lock
- In order to ensure that the menu settings are not changed by mistake, the person managing the Balance controls the password and can prohibitmenu operation
Specifications
| Model | ATX84 | ATX124 | ATX224 | ATY64 | ATY124 | ATY224 |
| Capacity | 82g | 120g | 220g | 62g | 120g | 220g |
Yes! I am Interested
X & Y Series Analytical Balances AP124X
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 120 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg (Standard deviation) |
| Linearity | +/-0.2 mg |
| Weight | Approx 7.0 Kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 45 to 120.009 g (100 g) |
| Repeatability For Low Loads | 0.1 mg (5 g low loads) |
| Minimum Weight | 200 mg |
| USB Host | Not Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Not Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Not Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Lonizer | Optional |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofX & Y Series Analytical Balances AP124X
Yes! I am Interested
X & Y Series Analytical Balances AP224X
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 220 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg (Standard deviation) |
| Linearity | +/-0.2 mg |
| Weight | Approx. 7.0 kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 220.009 g (200 g) |
| Repeatability Low Loads | 0.1 mg (10 g low loads) |
| Minimum Weight | 200 mg |
| USB Host | Not Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Not Included |
| mol Conversion Function | Included |
| Sample Concentration Preparation | Not Included |
| Inspection Support Function | Included |
| Clock CAL | Included |
| Lonizer | Optional |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of X & Y Series Analytical Balances AP224X
Yes! I am Interested
X & Y Series Analytical Balances AP324X
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 320 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.15 mg (Standard deviation) |
| Linearity | +/-0.3 mg |
| Weight | Approx. 7.0 kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 320.009 g (300 g) |
| Minimum Weight | 200 mg |
| USB Host | Not Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Not Included |
| HPLC Buffer Solution Preparation | Not Included |
| mol Conversion Function | Included |
| Clock CAL | Included |
| Lonizer | Optional |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofX & Y Series Analytical Balances AP324X
Yes! I am Interested
X & Y Series Analytical Balances AP124Y
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 120 g |
| Pan Size | 91 mm |
| Response Time | 2 sec |
| Repeatability | 0.1 mg (Standard deviation) |
| Linearity | +/-0.2 mg |
| Weight | Approx. 6.5 kg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 45 to 120.009 g (100 g) |
| Repeatability Low Loads | 0.1 mg (5 g low loads) |
| Minimum Weight | 200 mg |
| USB Host | Not Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Not Included |
| Sample Concentration Preparation | Not Included |
| mol Conversion Function | Not Included |
| Inspection Support Function | Not Included |
| Clock CAL | Not Included |
| Lonizer | Not Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Body Dimensions | W212xD367xH345 mm |
| Input Output Terminal | RS-232C (D-sub9P plug) USB device (Type B) |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofX & Y Series Analytical Balances AP124Y
Yes! I am Interested
X & Y Series Analytical Balances AP224Y
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Capacity | 220 g |
| Repeatability | 0.1 mg (Standard deviation) |
| Linearity | +/-0.2 mg |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 220.009 g (200 g) |
| Repeatability For Low Loads | 0.1 mg (10 g low loads) |
| Minimum Weight | 200 mg |
| Response Time for Trace Measurements | 2 sec |
| USB Host | Not Included (Type A) |
| USB Device | Included (Type B) |
| Recipe Compounding | Not Included |
| mol Conversion Function | Not Included |
| Sample Concentration Preparation | Not Included |
| Inspection Support Function | Not Included |
| Clock CAL | Not Included |
| Lonizer | Not Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Pan Size | 91 mm |
| Body Dimensions | W212xD367xH345 mm |
| Weight | Approx. 6.5 kg |
| Input Output Terminal | RS-232C (D-sub9P plug) USB device (Type B) |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofX & Y Series Analytical Balances AP224Y
Yes! I am Interested
X & Y Series Analytical Balances AP324Y
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Display | OEL display (dot matrix) |
| Repeatability | 0.15 mg (Standard deviation) |
| Linearity | +/-0.3 mg |
| Capacity | 320 g |
| Minimum Display | 0.1 mg |
| External Calibration Weight Range for Span Calibration | 95 to 320.009 g (300 g) |
| Repeatability For Low Loads | 0.1 mg (20 g low loads) |
| Minimum Weight | 200 mg |
| Response Time for Trace Measurements | 2 sec |
| Reponse Time | 2 sec |
| USB Host | Not Included (Type A) |
| USB Device | Included |
| Recipe Compounding | Not Included |
| HPLC Buffer Solution Preparation | Not Included |
| mol Conversion Function | Not Included |
| Inspection Support Function | Not Included |
| Clock CAL | Not Included |
| Lonizer | Not Included |
| Operating Temperature | 5 to 40 Deg C |
| Humidity Range | 20 to 85% RH |
| Sensitivity Stability Against Temperature Range | +/-2 ppm/ Deg C (10 to 30 Deg C) |
| Pan Size | 91 mm |
| Body Dimensions | W212xD367xH345 mm |
| Weight | Approx. 6.5 kg |
| Input Output Terminal | RS-232C (D-sub9P plug) USB device (Type B) |
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofX & Y Series Analytical Balances AP324Y
Yes! I am Interested
AUW Series Analytical Balance AUW220D
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Response Time | 3 s (large range), 15 s (small range) |
| Repeatability | Less than equal 0.1 mg (large range), Less than equal 0.05 mg (small range) |
| Linearity | +/-0.2 mg (large range), +/-0.1 mg (small range) |
| Capacity | 220 g / 82 g |
| Minimum Display | 0.1 mg / 0.01 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Pan Size | 80 mm Dia Approx. |
| Body Dimensions | W220xD330xH310 mm |
| Weight | 7 kg Approx. |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Excellent Weighing Performance
- Fast Response Compact UniBloc mechanism and digital processing technology produce fast response and stability at the same time.
- Environmental adjustment Microprocessor digital control can be set to automatically provide the most suitable data processing for the installation environment and weighing application.
Automatic Span Calibration
Span calibration is essential for accurate measurement in precision weighing to adjust for the effects of even small changes
in ambient temperature. AUW-D/AUW/AUX models have a built-in motor driven calibration weight to automate this
necessary operation. The balance can be set to take care of the calibration itself, leaving the operator to concentrate on
measurement work.
Fully-automatic calibration by temperature Room temperature change detection
The balance detects variations in the ambient temperature that influence accuracy and automatically performs calibration to compensate it. (AUW-D/AUW/AUX models) This great feature has been provided by Shimadzu since as early as 1985.
Fully-automatic calibration at user pre-set times
The balance automatically performs calibration at selected times, up to three times a day(e.g., before starting work, during lunch-break, or after work). (AUW-D/AUW models)
Span calibration at any time Touch-key calibration
Automated calibration can be started by pressing keys.
(AUW-D/AUW/AUX models)Also, your external calibration weights can be used for span calibration. (All models)
Application Support
- Efficient filling or dosing work "Pouring mode" brings very fast response with even a very small amount of sample added.
Suitable for filling or dosing works. - Formulation mode Convenient for making many measurements of minute samples and seeking the total mass.
- Specific Gravity Measurement Installing the optional SMK-401 specific gravity kit transforms the balance into a dedicated instrument for measuring specific gravity or density. Specific gravity measurement software is already installed in the Shimadzu balance.
- Below-weigh Hook for Hanging Measurement Measurement which cannot be performed within the weighing chamber is possible using the hook provided as a standard component.
- Piece Counting and Unit Conversion In addition to piece counting, the balance can also perform weight measurement as percentages and in a variety of mass units, such as carat.
- Interval Timer Data can be automatically output at time intervals set in the range from 1 second to 99 minutes 59 seconds. This function can be also combined with WindowsDirect. (AUW-D/AUW/AUX models)
User-friendly Features
User-friendly Weighing Chamber
- The large dimensions of the weighing chamber allow easy measurement of even tall flasks. Equalization in temperature before measurement is essential in precision weighing. This is easy with the extra space allowing samples to be kept inside the chamber. Weighing work is made easy by the smooth door movement.The doors can be detached to allow the chamber to be cleaned with ease and it is also possible to remove, clean or replace the door rail.
Easy Level Adjustment
- Level adjustment, particularly important in installing an analytical balance, can be performed with ease using an easy-to-view level gauge at the front of the balance and large level screws.
Metal Housing
- The aluminum die-cast housing offers lasting high quality exterior, r pr otection of the core mechanism, and ease of cleaning.
Yes! I am Interested
AUW Series Analytical Balance AUW120D
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 120 g / 42 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (large range), 12 s (small range) |
| Repeatability | Less than equal 0.1 mg (large range), Less than equal 0.02 mg (small range) |
| Linearity | +/-0.2 mg (large range), +/-0.03 mg (small range) |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg / 0.01 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Clock-CAL
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
Yes! I am Interested
AUW Series Analytical Balance AUW320
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 320 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.15 mg |
| Linearity | +/-0.3 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Clock-CAL
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
- Backlighted display
Yes! I am Interested
AUW Series Analytical Balance AUW220
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 220 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.1 mg |
| Linearity | +/-0.2 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Clock-CAL
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
- Backlighted display
Yes! I am Interested
AUW Series Analytical Balance AUW120
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 120 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.1 mg |
| Linearity | +/-0.2 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Clock-CAL
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
- Backlighted display
Yes! I am Interested
AUX220 Series Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 220 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.1 mg |
| Linearity | +/-0.3 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
Yes! I am Interested
AUY220 Series Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 220 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.1 mg |
| Linearity | +/-0.2 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C |
Functions and Features
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
Yes! I am Interested
AUY120 Series Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.1 mg |
| Linearity | +/-0.2 mg |
| Capacity | 120 g |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Pan Size | 80 mm Dia Approx. |
| Body Dimensions | W220xD330xH310 mm |
| Weight | 7 kg Approx. |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C |
Functions and Features
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
Yes! I am Interested
BL3200HL High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 3200 g |
| Minimum Display | 0.01 g |
| Repeatability | Less than equal 0.01 g (standard deviation) |
| Linearity | +/-0.03 g |
| Response Time | 1.0-1.2 sec. (approx.) |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-5ppm/ Deg C (10-30 Deg C) [10-35 Deg C] |
| Pan Size | 160x24 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD with back light |
Very Quick Response
- Very fast response makes a great difference.Even repeated weighing work is comfortable and efficient.
Compact Body
- The BL Series provides a high-precision electro-magnetic system that is just as compact as a portable scale.
High Stability
- The high stability mode of the BL Series produces steady readings even under poor environmental conditions
Various Unit Conversions
- Percentage mode, and various unit conversions are standard. Switching between these functions and units is a simple key-touch.
Analog Bar Display
- Remaining weighing capacity can be seen at a glance. Especially helpful when filling containers on the balance.
Square Pan
- Equipped with square pan for ease of operation.
Interface capabilities
- Optional EP-80 / 90 printer can be connected directly to BL Series balances to produce reports. An optional interface is available to enable communication with a PC.
Piece Counting Function
Quantity can be read as soon as parts are placed on the pan. To set, just load ten pieces and press the key.Pressing the key at 20, 50, or 100 pieces will produce even greater precision, especially for smaller parts.Switching between piece counting and gram display is a single key-touch.
Yes! I am Interested
AUX320 Series Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Capacity | 320 g |
| Pan Size | 80 mm Dia Approx. |
| Response Time | 3 s (Typical) |
| Repeatability | Less than equal 0.15 mg |
| Linearity | +/-0.3 mg |
| Weight | 7 Kg Approx. |
| Minimum Display | 0.1 mg |
| Operating Ambient Temperature | 5 to 40 Deg C |
| Body Dimensions | W220xD330xH310 mm |
| Power Consumption | 7 VA Approx. |
| Temperature Coefficient of Sensitivity | +/-2 ppm/ Deg C (When PSC is Off) (10 to 30 Deg C) |
| Sensitivity Stability Against Temperature Change | +/-2 ppm (When PSC is On, 10 to 30 Deg C) |
Functions and Features
- Built-in calibration weight
- PSC
- Built-in clock
- GLP/GMP/ISO calibration report
- WindowsDirect
- Formulation mode
- Interval timer output
- RS-232 I/F
- Specific gravity measurement software, piece counting, % display
- Analog display
Yes! I am Interested
BL220H High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 220 g |
| Minimum Display | 0.001 g |
| Repeatability | Less than equal 0.001g (standard deviation) |
| Linearity | +/-0.002 g |
| Response Time | 1.0-1.2 sec. (approx.) |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-3ppm/ Deg C (10-35 Deg C) |
| Pan Size | 100x100 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Simple windbreak (brown smoke color), Protective in-use cover |
| Display | LCD |
We are offering BL220H High-Precision Electronic Balances to our clients.
Yes! I am Interested
BL3200S High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 3200 g |
| Minimum Display | 0.1 g |
| Repeatability | Less than equal 0.06 g (standard deviation) |
| Linearity | +/-0.1 g |
| Response Time | 0.8-1.0 sec. |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-10ppm/ Deg C (10-35 Deg C) |
| Pan Size | 160x24 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD |
We are offering BL3200S High-Precision Electronic Balances to our clients.
Yes! I am Interested
BL620S High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 620 g |
| Minimum Display | 0.01 g |
| Repeatability | Less than equal 0.01 g (standard deviation) |
| Linearity | +/-0.01 g |
| Response Time | 0.8-1.0 sec. |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-10ppm/ Deg C (10-35 Deg C) |
| Pan Size | 160x24 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD |
We are offering BL620S High-Precision Electronic Balances to our clients.
Yes! I am Interested
BL320S High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 320 g |
| Minimum Display | 0.01 g |
| Repeatability | Less than equal 0.006 g (standard deviation) |
| Linearity | +/-0.01 g |
| Response Time | 0.8-1.0 sec. |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-10ppm/ Deg C (10-35 Deg C) |
| Pan Size | 100x100 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD |
We are offering BL320S High-Precision Electronic Balances to our clients.
Yes! I am Interested
BL320H High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 320 g |
| Minimum Display | 0.001 g |
| Repeatability | Less than equal 0.001g (standard deviation) |
| Linearity | +/-0.003 g |
| Response Time | 1.0-1.2 sec. (approx.) |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-5ppm/ Deg C (10*30 Deg C) [10-35 Deg C] |
| Pan Size | 100x100 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Simple windbreak (brown smoke color), Protective in-use cover |
| Display | LCD |
We are offering BL320H High-Precision Electronic Balances to clinets.
Yes! I am Interested
BL2200H High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 2200 g |
| Minimum Display | 0.01 g |
| Repeatability | Less than equal 0.01 g (standard deviation) |
| Linearity | +/-0.02 g |
| Response Time | 1.0-1.2 sec. (approx.) |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-3ppm/ Deg C (10-35 Deg C) |
| Pan Size | 160x24 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD |
We are offering BL2200H High-Precision Electronic Balances to our clients.
Yes! I am Interested
BL3200H High-Precision Electronic Balances
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Dimensions | W170xD240xH75 mm |
| Capacity | 3200 g |
| Minimum Display | 0.01 g |
| Repeatability | Less than equal 0.01 g (standard deviation) |
| Linearity | +/-0.03 g |
| Response Time | 1.0-1.2 sec. (approx.) |
| Ambient Temperature | 5-40 Deg C/ 41-104 Deg F |
| Temperature Coefficient of Sensitivity | +/-5ppm/ Deg C (10-30 Deg C) [10-35 Deg C] |
| Pan Size | 160x24 mm |
| Weight | 2.2 Kg |
| Power Requirement | AC adapter; 90V-264V, -15%-+10%, 50/60Hz |
| Standard Accessories | Protective in-use cover |
| Display | LCD |
We are offering BL3200H High-Precision Electronic Balances to our clients.
Yes! I am Interested
TXB4201L Electronic Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 4200 g |
| Pan Size | 160 mm |
| Linearity | +/-0.2 g |
| Weight | 1.5 Kg |
| Repeatability | 0.1 g |
| Minimum Display | 0.1 g |
| Operating Ambient Temperature | 5-40 Deg C |
| Temperature Coefficient Sensitivity | +/-10 (ppm/ Deg C) (10-30 Deg C) |
| Main Body Dimensions | W199xD260xH77 mm |
| Power Requirements | 12V 1A or 6AA batteries |
We are offering TXB4201L Electronic Analytical Balance to our clients.
Yes! I am Interested
TXB6201L Electronic Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 6200 g |
| Pan Size | 160 mm |
| Linearity | +/-0.2 g |
| Weight | 1.5 Kg |
| Repeatability | 0.1 g |
| Minimum Display | 0.1 g |
| Operating Ambient Temperature | 5-40 Deg C |
| Temperature Coefficient Sensitivity | +/-5 (ppm/ Deg C) (10-30 Deg C) |
| Main Body Dimensions | W199xD260xH77 mm |
| Power Requirements | 12V 1A or 6AA batteries |
We are offering TXB6201L Electronic Analytical Balance to our clients.
Yes! I am Interested
TXB621L Electronic Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 620 g |
| Pan Size | 110 mm |
| Linearity | +/-0.1 g |
| Weight | 1.5 Kg |
| Repeatability | 0.1 g |
| Minimum Display | 0.1 g |
| Operating Ambient Temperature | 5-40 Deg C |
| Temperature Coefficient Sensitivity | +/-20 (ppm/ Deg C) (10-30 Deg C) |
| Main Body Dimensions | W199xD260xH77 mm |
| Power Requirements | 12V 1A or 6AA batteries |
We are offering TXB621L Electronic Analytical Balance to our clients.
Yes! I am Interested
TXB6200L Electronic Analytical Balance
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product BrochureProduct Details:| Capacity | 6200 g |
| Pan Size | 160 mm |
| Linearity | +/-1 g |
| Weight | 1.5 Kg |
| Repeatability | 1 g |
| Minimum Display | 1 g |
| Operating Ambient Temperature | 5-40 Deg C |
| Temperature Coefficient Sensitivity | +/-20 (ppm/ Deg C) (10-30 Deg C) |
| Main Body Dimensions | W199xD260xH77 mm |
| Power Requirements | 12V 1A or 6AA batteries |
We are offering TXB6200L Electronic Analytical Balance to our clients.
Yes! I am Interested
Looking for Electronic Analytical Balance ?
X
Explore More Products
Contact via E-mail
Contact via SMS
Bharat Bist (Partner)
Lab Sales Corporation
Lab Sales Corporation
1053, Phatak Muftiwalan, Tiraha Behram Khan,Daryaganj
New Delhi - 110002, Delhi, India
New Delhi - 110002, Delhi, India
Call Us: Call Response Rate: 61%
© Lab Sales Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited