Lab Sales Corporation
Lab Sales Corporation
Send Email
Call 0804871904064% Response Rate
Search

Home » Our Products » Electrochemical Instrument


Electrochemical Instrument

Offering you a complete choice of products which include conductivity tester, do 450 dissolved oxygen handheld meter, pc 450 digital handheld conductivity meters, bench top meters, pd 450 dissolved oxygen handheld meter and ph 150 dissolved oxygen handheld meter.

Conductivity Tester

REQUEST CALLBACK

Conductivity Tester
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Power4 x 1.5 V "A76" Micro alkaline battery More than150 Hours
DimensionTester: 16.5x3.8 cm, Boxed: 22x6x5 cm
Temperature DisplayYes
Operating Temperature0 to 50 Deg C
ATC0 to 50 Deg C
Temperature Coefficient2% per Deg C
Normalization Temperature25.0 Deg C
Auto Off8.5 Minutes after last key pressed
Non Volatile MemoryYes
LCD DisplayH2.7xW2.1 cm
WeightTester: 90 g, Boxed: 170 g

Equipped with a wider conductivity range that lets you measure from pure water to waste-water, Eutech's new auto-ranging ECTestr11 and ECTestr11+ now comes with simultaneous temperature readouts and easy automatic calibration for selected ranges.

Features
  • Automatic temperatur Compensation
  • Automatic Single & Multi-Point Calibration with Automatic or Manual Options
  • Large dual-display screen
  • Simultaneous Temperature Display
  • Non-Volatile Memory
  • Replaceable Sensors
  • Advanced Power Management
  • Expanded Range to Measure in More Media
  • 1- Warranty on the Meter and 6 Months of electrode

Greater Convenience with Dual & Multi Range Testers

The dual range ECTestr11 comes in two ranges - 0 to 2000 uS/cm and 0 to 20.00 mS/cm; while the multi-range ECTestr11+ measures up to three ranges - 0 to 200.0 uS/cm; 2000 uS/cm and 20.00 mS/cm. All models are equipped with selectable or auto-ranging capabilities and provide direct readouts for easy testing on-the-go.

Higher Accuracy with Multi-Point Calibration

Choose either automatic or manual calibration mode to suit your calibration standards. Customize the calibration settings according to your measurement needs, or simply use the convenient single-point calibration for basic testing requirements.

Lower Operating Costs with User-Replaceable Sensors & Auto Power-Off Feature

Sensor replacement is easy and user-friendly with the convenient screw cap design. Tester body is reusable, providing additional cost savings in the long run. In addition, your tester automatically shuts off after 8.5 minutes of inactivity to conserve battery life. Advanced power management design ensures batteries last
more than 150 hours.

Wide Applications with Innovative Sensor Design

The unique cup style sensor of ECTestr11+ is perfect for micro sample measurements. Dip-type sensor is available also for dual range models. Valox sensor casing with industrial grade SS316 stainless steel sensor element protects against harsh sample and ensures superior chemical durability for most of your applications.

Rugged Waterproof, Anti-Roll Design

Unique anti-roll ribbed design ensures firm grip. Even if accidentally dropped into water, the ECTestr11 series is waterproof to IP67 standards, and floats for easy retrieval.

Applications

  • Water & wastewater treatment
  • Boiler blow-down
  • Electroplating rinse tanks
  • Drinking water
  • Hydroponics
  • Printing Industry
  • Aquaculture
  • Aquariums & fish farms
  • Swimming pools

Specifications

Large Screen Conductivity TestersECTestr11ECTestr11+
Range0 to 2000 uS/cm,0 to 20.00 mS/cm0 to 200.0 uS/cm,0 to 2000 uS/cm 0 to 20.00 mS/cm
Resolution10 uS/cm 0.10 mS/cm0.1 uS/cm; 1 uS/cm 0.01 mS/cm
Calibration Points (Auto)2(1413 uS/cm 12.88 mS/cm)3(84.0 uS/cm, 1413 uS/cm, 12.88 mS/cm)
Calibration Points (Manual)2 (One per range)3 (One per range)


    Additional Information:

    • Item Code: ECTEST11
    Yes! I am Interested

    DO 450 Dissolved Oxygen Handheld Meter

    REQUEST CALLBACK

    DO 450 Dissolved Oxygen Handheld Meter
    • DO 450 Dissolved Oxygen Handheld Meter
    • DO 450 Dissolved Oxygen Handheld Meter
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Battery TypeTwo AA batteries (included)
    DisplayCustom LCD with backlight
    MemoryStores up to 500 data sets
    OutputUSB or RS232
    Real Time ClockTime and date stamp on calibration and stored data
    Working TimeMore than 100 hours (without backlight)
    DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
    WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)

    Affordable optical RDO technology reduces maintenance time and costs
    • Maintenance free optical probe with no electrolyte eliminates hassle of replacing delicate membranes and salt build up from refilling solutions
    • Durable waterproof and dustproof design with IP67 rating
    • Large, backlit custom display provides measurement with temperature
    • Switch between % saturation and mg/L (ppm) dissolved oxygen with a press of a button
    • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
    • Manual barometric pressure and salinity correction
    • Selectable oC or oF - Choose the unit to best fit your application
    • Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
    • Store up to 500 data sets - Easy USB or RS232 output with optional data cables
    • Built-in real-time clock stamps stored data and calibration data with time and date -Meets standards for GLP (Good Laboratory Practices)
    • 500 hours battery life or use optional universal power adapter
    • Built-in stand with wall-mount - Allows for easy benchtop measurement and storage

    Specifications

    Dissolved OxygenRange0 to 200 %; 0 to 20 ppm/mg/L
    Resolution0.10 %; 0.1 ppm/mg/L
    Accuracy+-2 %; +-0.1 ppm or mg/L up to 8; +-0.2 ppm or mg/L above 8
    CalibrationZero and saturation
    TemperatureRange0.0 to 50.0 oC (0.0 to 122.0 oF)
    Resolution0.1 oC/oF
    Accuracy+-0.5 oC; +-0.9 oF
    CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
    Yes! I am Interested

    PC 450 Digital Handheld Conductivity Meters

    REQUEST CALLBACK

    PC 450 Digital Handheld Conductivity Meters
    • PC 450 Digital Handheld Conductivity Meters
    • PC 450 Digital Handheld Conductivity Meters
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MemoryStores up to 500 data sets
    DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
    DisplayLCD with backlight
    OutputUSB or RS232
    Real Time ClockTime and date stamp on calibration and stored data
    Working TimeMore than 100 hours (without backlight)
    WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)
    Voltage9 V DC adapter
    Battery TypeTwo AA batteries (included)

    pH / mV / Conductivity / Total Dissolved Solids / Salinity / Temperature PC 450 accepts a single pH/Con probe or separate pH and conductivity probes
    • Switch between pH, mV, conductivity, TDS and salinity with a press of a button
    • Grip-ClipTM - Quickly and easily secures separate pH and conductivity electrodes
    • Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with
    • DIN). New manual option allows calibration with up to 5 custom buffer standards you
    • Auto buffer recognition - Automatically identifies the correct pH buffer for rapid calibration
    • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
    • Intuitive, user-friendly icons - Electrode status displays pH slope or cell constant
    • Auto-range conductivity from 0 to 199.9 mS in five ranges - With up to five calibration points
    • Selectable cell constant - 0.10, 1.00 or 10.0
    • Adjustable temperature coefficient - From 0.00 to 10.00 % per oC
    • Conductivity-to-TDS factor - Adjustable from 0.40 to 1.00
    • Selectable oC/oF - Choose units to best fit your application
    • Ready indicator, manual or automatic measurement hold feature and optional automatic
    • shutoff function
    • Store up to 500 data sets; easy USB or RS232 output with optional data cables
    • Built-in real-time clock stamps stored data and calibration data with time and date -
    • Meets standards for GLP (Good Laboratory Practices)
    • 500 hours battery life or use optional universal power adapter
    • Built-in stand with wall-mount - Allows for easy benchtop measurement and storage

      Specifications

      pHRange-2.00 to 16.00 pH
      Resolution0.01 pH
      Accuracy+-0.01 pH
      CalibrationUp to 6 points USA, NIST, DIN or custom
      mVRange+-2000 mV
      Resolution0.1 mV +-999.9 mV; 1 mV beyond
      Accuracy+-0.2 mV +2 or +0.5 % of reading; whichever is greater
      Calibration+-200 mV
      ConductivityRange0 to 200 mS; 0 to 20 mS if using COMBI03BW probe
      Resolution0.01 S to 0.1 mS
      Accuracy+-1 % full scale
      CalibrationAuto/manual; one point per range
      TDSRange0 to 200 ppt (TDS factor 1.0)
      Resolution0.01 ppm to 0.1 ppt
      Accuracy+-1 % full scale
      CalibrationManual; 1 point/range
      TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
      Resolution0.1 oC/oF
      Accuracy+-0.5 oC; +-0.9 oF
      CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
        Yes! I am Interested

        Bench Top Meters

        REQUEST CALLBACK

        Bench Top Meters
        • Bench Top Meters
        • Bench Top Meters
        • Bench Top Meters
        • +2 Bench Top Meters
        Ask for Price

        Thanks for Contacting Us.

        Product Price :Get Latest Price

        Product Brochure
        Product Details:
        pH Range-1.99 to 16.00 pH
        pH Resolution0.01 pH
        pH Accuracy+/-0.002
        pH Cal PointsUp to 5 points
        pH Buffer SetsUSA, NIST
        Memory Data100 data sets
        Voltage9 V DC adapter
        Current3.3 A (100/240 VAC, SMPS)
        DimensionMeter: L17.5xW15.5xH6.9 cm, Boxed: L30.8xW23.5xH12.4 cm
        WeightMeter: 650 g, Boxed: 1800 g

        Bench Meters are the best solutions for Water Analysis. Following are the features of Bench Meters

        Features
        • Simple operations
        • Dual measurements includes temperature display with all readings
        • 100 Point memory
        • Detachable electrode holder
        • Compact footprint saves valuable Bench Space
        • Custom setup options
        • Hold function and stability indicator
        • 1-Year Warranty on the meter and 6 months of Electrode

        Specifications

        ORPRange+-1999 mV
        Rel. mV Range+-1999 mV
        Resolution0.1 mV (+-199.9 mV) / 1 mV (beyond)
        Accuracy+-0.2 mV (+-199.9 mV) / +-2 mV (beyond)
        TemperatureRange0.0 to 100.0 oC / 32.0 to 212.0 oF
        Resolution0.1 oC / 0.1 oF
        Accuracy+-0.5 oC / +-0.9 oF
        CompensationAutomatic or Manual (0 to 100 oC / 32 to 212 oF)
        CalibrationOffset in 0.1 o increments; offset range +- 5 oC / 9 oF


          Additional Information:

          • Item Code: 700Series
          Yes! I am Interested

          PD 450 Dissolved Oxygen Handheld Meter

          REQUEST CALLBACK

          PD 450 Dissolved Oxygen Handheld Meter
          Ask for Price

          Thanks for Contacting Us.

          Product Price :Get Latest Price

          Product Details:
          Battery TypeTwo AA batteries (included)
          DisplayLCD with backlight
          MemoryStores up to 500 data sets
          OutputUSB or RS232
          Real Time ClockTime and date stamp on calibration and stored data
          Temperature CompensationAutomatic or manual from -10 to 110 Deg C
          Working TimeMore than 100 hours (without backlight)
          DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
          WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)

          pH / mV / Dissolved Oxygen / Temperature
          Affordable optical RDO technology reduces maintenance time and costs
          • Maintenance free optical probe with no electrolyte eliminates hassle of replacing delicate
          • membranes and salt build up from refilling solutions
          • Switch between pH, mV, % saturation and mg/L (ppm) dissolved oxygen - With the press of a button
          • Durable waterproof and dustproof design with IP67 rating
          • Large, backlit graphic display provides measurement with temperature
          • Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with
          • DIN). New manual option allows calibration with up to 5 custom buffer standards
          • Auto buffer recognition - Automatically identifies the correct pH buffer for rapid calibration
          • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
          • Selectable oC or oF - Choose units to best fit your application
          • Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
          • Store up to 500 data sets - Easy USB or RS232 output with optional data cables
          • Built-in real-time clock stamps stored data and calibration data with time and date -
          • Meets standards for GLP (Good Laboratory Practices)

          Specifications

          pHRange-2.00 to 16.00 pH
          Resolution0.01 pH
          Accuracy+-0.01
          CalibrationUp to 6 points USA, NIST, DIN or custom
          mVRange+-2000 mV
          Resolution0.1 mV +-999.9 mV; 1 mV beyond
          Accuracy+-0.2 mV +2 or +0.5 % of reading; whichever is greater
          Calibration+-200 mV
          Dissolved OxygenRange0 to 200 %; 0 to 20 ppm/mg/L
          Resolution0.10 %; 0.1 ppm/mg/L
          Accuracy+-2 %; +-0.1 ppm or mg/L up to 8; +-0.2 ppm or mg/L above 8
          CalibrationZero and saturation
          TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
          Resolution0.1 oC/oF
          Accuracy+-0.5 oC; +-0.9 oF
          CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
            Yes! I am Interested

            pH 150 Dissolved Oxygen Handheld Meter

            REQUEST CALLBACK

            pH 150 Dissolved Oxygen Handheld Meter
            Ask for Price

            Thanks for Contacting Us.

            Product Price :Get Latest Price

            Product Details:
            Battery TypeTwo AA batteries (included)
            DisplayThree line custom LCD
            Temperature CompensationAutomatic or manual from -10 to 110 Deg C
            MemoryStores up to 150 data sets
            Working TimeMore than 700 hours continuous use; AC adapter (optional)
            DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
            WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)
            Voltage9 V DC adapter
            Current1.3 A (100/240 VAC, SMPS) (optional)
            OutputUSB or RS232
            IP RangeIP67

            Other Details
            • Large, three line LCD - View pH or mV measurement with temperature and % slope
            • Built-in memory function - Stores up to 150 measurements along with temperature
            • Auto buffer recognition - Automatically identifies USA, NIST or DIN buffer sets for
            • rapid calibration
            • Power with AA batteries or use optional AC adapter for benchtop measurements
            • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
            • Selectable oF/oC - Choose units to best fit your application
            • Features mV offset - Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
            • Ready indicator, manual or automatic measurement hold feature and optional automatic
            • shutoff function
            • % slope and temperature displayed with each measurement
            • Built-in stand - Ideal for easy benchtop or long-term use
            • Wall-mount option - Ideal to save on bench space
            • Includes innovative Grip-ClipTM - Quickly and easily secures the electrode to your beaker or container
            • Compatible with pH electrodes having a BNC connector

            Specifications

            pHRange-2.00 to 16.00 pH
            Resolution0.01 pH
            Accuracy+-0.01 pH
            CalibrationUp to 5 points (USA & NIST) Up to 6 points (DIN)
            mVRange+-2000 mV
            Resolution0.1 mV +-999.9 mV; 1 mV beyond
            Accuracy+-0.2 mV +2 or +0.5 % of reading; whichever is greater
            Calibration+-200 mV
            TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
            Resolution0.1 oC/oF
            Accuracy+-0.5 oC; +-0.9 oF
            CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
            Yes! I am Interested

            CON 150 Dissolved Oxygen Handheld Meter

            REQUEST CALLBACK

            CON 150 Dissolved Oxygen Handheld Meter
            Ask for Price

            Thanks for Contacting Us.

            Product Price :Get Latest Price

            Product Details:
            IP RangeIP67
            DisplayThree line custom LCD
            Temperature CompensationAutomatic or manual from -10 to 110 Deg C
            Temperature Coefficient0.0 to 10.0 %/ Deg C
            Memory DataStores up to 150 data sets
            Working TimeMore than 500 hours continuous use; AC adapter (optional)
            DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
            WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)
            Voltage9 V DC adapter
            Current1.3 A (100/240 VAC, SMPS) (optional)
            OutputUSB or RS232
            Battery TypeTwo AA batteries (included)

            Other Details
            • Large, three line LCD - View conductivity or TDS measurement with temperature as well as cell efficiency
            • Built-in memory function - Stores up to 150 measurements along with temperature
            • Adjustable temperature coefficient - Set to 0.0 % to meet USP methods for non-compensated measurements
            • Power with AA batteries or use optional AC adapter
            • Calibrate using automatically recognized standards or manually; to a single point across all ranges or to multiple points (one calibration point per each conductivity range)
            • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
            • Accepts probes with a 0.1, 1.0, or 10 cell constant
            • Adjustable conductivity-to-TDS conversion factor - From 0.4 to 1.0
            • Selectable manual or automatic temperature compensation (ATC) - For the highest accuracy in any situation
            • Selectable oF/oC - Choose units to best fit your application
            • Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
            • Includes our easy to clean conductivity cell
            • Built-in stand - For easy benchtop or long-term use
            • Wall-mount option - Ideal to save bench space
            • Innovative Grip-ClipTM - Quickly and easily secures the probe to your beaker or container

            Specifications

            ConductivityRange0 to 200 mS
            Resolution0.01 S to 0.1 mS
            Accuracy+-1 % full scale
            CalibrationAuto/manual; 1 point/range
            TDSRange0 to 200 ppt (TDS factor 1.0)
            Resolution0.01 ppm to 0.1 ppt
            Accuracy+-1 % full scale
            CalibrationManual; 1 point/range
            TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
            Resolution0.1 oC/oF
            Accuracy+-0.5 oC; +-0.9 oF
            CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
              Yes! I am Interested

              pH 450 Dissolved Oxygen Handheld Meter

              REQUEST CALLBACK

              pH 450 Dissolved Oxygen Handheld Meter
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Details:
              Battery TypeTwo AA batteries (included)
              DisplayCustom LCD with backlight
              MemoryStores up to 500 data sets
              OutputUSB or RS232
              Real Time ClockTime and date stamp on calibration and stored data
              Temperature CompensationAutomatic or manual from -10 to 110 Deg C
              Working TimeMore than 500 hours (without backlight); AC adapter (optional)
              DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
              WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)
              IP RangeIP67

              Other Details
              • Large, backlit display - View measurement with temperature and % slope
              • Grip-ClipTM - Quickly and easily secures the pH electrode to your beaker or container
              • Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards
              • Auto buffer recognition - Automatically identifies the correct pH buffer for rapid calibration
              • Calibration due alarm - Set a visible reminder when it is time to recalibrate the meter
              • Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
              • Selectable oC/oF - Choose units to best fit your application
              • Intuitive, user-friendly icons - Electrode status displays pH slope
              • Store up to 500 data sets - Easy USB or RS232 output with optional data cables
              • Built-in real-time clock stamps stored data and calibration data with time and date - Meets standards for GLP (Good Laboratory Practices)
              • Extended battery life from two AA batteries, or use optional universal power adapter
              • Built-in stand with wall-mount option - Allows for easy benchtop measurement or storage
              • Compatible with pH, ORP or ISE electrodes having a BNC connector

              Specifications

              pHRange-2.00 to 16.00 pH
              Resolution0.01 pH
              Accuracy+-0.01 pH
              CalibrationUp to 5 points (USA & NIST & CUSTOM) Up to 6 points (DIN)
              mVRange+-2000 mV
              Resolution0.1 mV +-999.9 mV; 1 mV beyond
              Accuracy+-0.2 mV +2 or +0.5 % of reading; whichever is greater
              Calibration+-200 mV
              IONRange0.0 to 2000 ppm
              Resolution0.01 / 0.1 / 1 ppm
              Accuracy+-0.5 % full scale (monovalent); +-1 % full scale (divalent)
              CalibrationFrom 2-4 or 2-5 points 0.10, 1.00, 10.0, 100.0 & 1000 /0.20, 2.00, 20.0, 200.0 & 2000 / 0.50, 5.00, 50.0 & 500.0
              TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
              Resolution0.1 oC
              Accuracy+-0.5 oC; +-0.9 oF
              CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
              Yes! I am Interested

              CON 450 Dissolved Oxygen Handheld Meter

              REQUEST CALLBACK

              CON 450 Dissolved Oxygen Handheld Meter
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Details:
              Battery TypeTwo AA batteries (included)
              DisplayCustom LCD with backlight
              MemoryStores up to 500 data sets
              OutputUSB or RS232
              Real Time ClockTime and date stamp on calibration and stored data
              Temperature CompensationAutomatic or manual from -10 to 110 Deg C
              Working TimeMore than 300 hours (without backlight) AC adapter
              DimensionMeter: L20xW8.3xH5.7 cm, Boxed: L23xW23xH7 cm
              WeightMeter: 1 lb (0.5 kg) ; Boxed: 1.4 lb (0.7 kg)
              Voltage9 V DC adapter
              Current1.3 A (100/240 VAC, SMPS) (optional)

              Other Details
              • Large, backlit custom display - View measurement with temperature and cell efficiency
              • Grip-ClipTM - Quickly and easily secures the probe to your beaker or container
              • Calibrate using automatically recognized standards or manually; to a single point across all ranges or to multiple points (one calibration point per each conductivity range)
              • Selectable cell constant - 0.10, 1.00, or 10.0
              • Adjustable temperature coefficient from 0.00 to 10.00 % per oC. Set to 0.0 % to meet USP methods for non-compensated measurements
              • Adjustable conductivity-to-TDS factor - Adjustable 0.4 to 1.0
              • Selectable oC / oF - Choose units to best fit your application
              • Includes our easy to clean conductivity cell
              • Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
              • Store up to 500 data sets with data - Use USB or RS232 output with optional data cable to
              • send data to your software or our free communication software
              • Built-in real-time clock stamps stored data and calibration data with time and date - Meets standards for GLP (Good Laboratory Practices)
              • Built-in stand with wall-mount - Allows for easy benchtop measurement or storage

              Specifications

              ConductivityRange0 to 200 mS
              Resolution0.01 S to 0.1 mS
              Accuracy+-1 % full scale
              CalibrationAuto/manual; 1 point/range
              TDSRange0 to 200 ppt (TDS factor 1.0)
              Resolution0.01 ppm to 0.1 ppt
              Accuracy+-1 % full scale
              CalibrationManual; 1 point/range
              SalinityRange0 to 50 ppt
              Resolution0.01
              Accuracy+-1 % full scale
              CalibrationManual; 1 point
              TemperatureRange-10.0 to 110.0 oC (14.0 to 230.0 oF)
              Resolution0.1 oC/oF
              Accuracy+-0.5 oC; +-0.9 oF
              CalibrationOffset in 0.1 increments, +-10 oC or +-18 oF
              Yes! I am Interested

              DO110 Hand Held Dissolved Oxygen Meter

              REQUEST CALLBACK

              DO110 Hand Held Dissolved Oxygen Meter
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Brochure
              Product Details:
              Battery LifeMore than 200 hours
              ProbeGalvanic
              Probe Operating Range0 to 50 Deg C
              Response Time40 seconds to achieve 93% of the reading
              Memory100
              Hold FunctionYes
              Auto OffSelectable
              DisplayLCD
              Power Requirements4 'AAA' batteries; AC/DC adapter 9V, 50 mA
              Temperature CompensationAutomatic
              DimensionMeter: 18x9x4 cm, Boxed: 24x23x7 cm
              WeightMeter: 220 g, Boxed: 600 g

              Pressure And Salinity Compensation
              Barometric pressure and salinity value can be keyed manually into the setup option. This gives flexibility for the meter to be used in different locations and different types of solution. Compensation is automatic thus eliminating the need for cumbersome charts.

              Memory
              Up to 100 sets of data can be stored in a non-volatile memory which prevents data loss even when meter is powered off.

              Easy-To-Read Display
              The large LCD (Liquid Crystal Display) shows both primary (dissolved oxygen) and secondary (temperature) values measured, complete with mode and measurement units. Graphic symbols and error message codes provide user comprehensive information for easy and trouble-free operation.

              Electrode With Built-In Temperature Sensor
              Galvanic cell allows instantaneous measurements without waiting for the probe to be polarised as is the case with amperometric electrodes. The rugged galvanic electrode is optimised for quick response and is able to withstand the rigours of portable use. It requires little or no maintenance and has a built-in automatic
              temperature compensator. Includes an integral 3 or 8 metre waterproof cable.

              Electrode Diagnosis
              Condition of electrode can be viewed through the setup menu, making it easy for user to check on the accuracy of readings.

              Innovative Design
              Eutech Instruments hand-held meters are ergonomically designed for field operation and include a sturdy hinge for bench top measurements. Connections for the probe and optional AC adapter can be easily accessed.

              Specifications
              Dissolved OxygenRange0.00 - 19.99 mg/l or ppm
              Resolution0.01 mg/l ; 0.01 ppm
              Accuracy+-1.5% of full scale
              % Saturation Of OxygenRange0.0 - 199.9%
              Resolution0.1%
              Accuracy+-1.5% of full scale
              Meter TemperatureRange-10 to 110 o C (14-230.0 o F)
              Resolution0.1 o C / 0.1 DegreeF (14 to 199.9 DegreeF);1.0 DegreeF (200 to 230 DegreeF)
              Accuracy+- 0.5 o C (+- 0.9 o F)
              Salinity CorrectionRange0.0 - 50.0 ppt
              Resolution0.1 ppt
              MethodManual input and automatic correction
              Barometric PressureRange500 to 1499 mm Hg or
              Correction66.6 to 199.9 kPA
              Resolution1 mm Hg or 0.1 kPA
              MethodManual input and automatic correction
              Yes! I am Interested

              CON 110 Hand Held Conductivity Meter

              REQUEST CALLBACK

              CON 110 Hand Held Conductivity Meter
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Brochure
              Product Details:
              Inputs6-pin connector, power jack
              Temperature CompensationAutomatic / Manual (from 0 to 100 Deg C)
              Temperature Cofficient0.0 to 10.0% / Deg C
              OutputRS 232C
              Auto RangingYes (manual select available)
              Hold FunctionYes
              Auto Power OffAfter 20 minutes (selectable)
              Operating Range0 to 50 Deg C
              DisplayCustom Dual LCD
              Power Requirements4 'AAA' alkaline batteries, AC / DC adapter 9V, 200 mA
              Battery LifeMore than 200 hours
              DimensionMeter: 18.7x9x4 cm, Boxed: 24x23x7 cm
              WeightMeter: 290 g, Boxed: 650 g

              The CyberScan CON 11/110 Conductivity meters are equipped with new generation Application Specific Integrated Circuits that provide many advanced features and user customisable options while maintaining a user-friendly interface. Battery or AC mains powered, these meters are ideal for both lab and field conductivity measurements.

              User Customisable Options
              Among the several user-customisable options are Selection of Normalisation Temperature, Temperature Coefficient, TDS (Total Dissolved Solids) factor, Cell constant, Memory Input and Recall, Printing, Auto-off, READY indication, Default Setup and View Electrode Diagnosis.

              Memory And Computer Interface
              Up to 100 data sets can be stored in a non-volatile memory which prevents data loss even when meter is powered off.. A RS232 port ( CON 110 ) at the bottom of the instrument enables transfer of data (via cable) to a printer or a computer for further analysis. Data aquisition software and cables are included.

              Easy-To-Read Dual Display
              The custom designed dual LCD (Liquid Crystal Display) is extremely easy to read. It displays primary (Conductivity ) and secondary (Temperature) modes simultaneously , complete with
              units of measure. Graphical icons and self-diagnostic message codes provide user comprehen-sive information for easy operation.

              Electrode With Built-In Temperature Sensor
              The conductivity electrode has a built-in temperature sensor and is specially designed to minimise bubble entrapment during measurement. Wetted materials include Stainless Steel, PBT and Ultem, all of which have excellent chemical durability.

              Innovative Design
              The Con 11 / 110 meters are innovative and ergonomic in design. Meters are designed for convenient one-hand field operation and table top laboratory use. Keypad is splash-proof and designed for easy finger touch operation. Aesthetic attachments include a electrode holder for conductivity electrode and a built-in meter stand for table top measurements. A rugged carrying case enables compact.
              Specifications


              CON 110

              RangeResolutionAccuracy
              CON0 to 19.99 S0.01+-0.2 S

              20.0 to 199.9 S0.1+-2 S

              200 to 1999 S1+-20 S

              2.00 to 19.99 mS0.01+-0.2 mS

              20.0 to 199.9 mS0.1+-2 mS
              TDS1.00 to 9.99 ppm0.01+-0.1 ppm

              10.0 to 99.9 ppm0.1+-1 ppm

              100 to 999 ppm1+-0.1 ppm

              0 to 9.99 ppt0.01+-1 ppt

              10.0 to 99.9 ppt0.1+-10 ppt

              Yes! I am Interested

              CON 11 Hand Held Conductivity Meter

              REQUEST CALLBACK

              CON 11 Hand Held Conductivity Meter
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Brochure
              Product Details:
              Memory50
              DimensionMeter: 18.7x9x4 cm, Boxed: 24x23x7 cm
              TDS Factor0.4 to 1.0
              Temperature-10.0 to 110.0 Deg C
              Resolution0.1
              Inputs6-pin connector, power jack
              Temperature Cofficient0.0 to 10.0% / Deg C
              Normalization Temperature20.0 or 25.0 Deg C
              Auto RangingYes (manual select available)
              Hold FunctionYes
              Auto Power OffAfter 20 minutes (selectable)
              Operating Range0 to 50 Deg C
              DisplayCustom Dual LCD
              Power Requirements4 'AAA' alkaline batteries, AC / DC adapter 9V, 200 mA
              Battery LifeMore than 200 hours
              WeightMeter: 290 g, Boxed: 650 g

              Specifications


              CON 10

              RangeResolutionAccuracy
              CON0 to 19.99 S0.01+-0.2 S

              20.0 to 199.9 S0.1+-2 S

              200 to 1999 S1+-20 S

              2.00 to 19.99 mS0.01+-0.2 mS

              20.0 to 199.9 mS0.1+-2 mS
              TDS1.00 to 9.99 ppm0.01+-0.1 ppm

              10.0 to 99.9 ppm0.1+-1 ppm

              100 to 999 ppm1+-0.1 ppm

              0 to 9.99 ppt0.01+-1 ppt

              10.0 to 99.9 ppt0.1+-10 ppt
              Yes! I am Interested

              Ion 700 Bench Top Meters

              REQUEST CALLBACK

              Ion 700 Bench Top Meters
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Details:
              pH Range0.00 to 14.00 pH
              pH Resolution0.01 pH
              pH Accuracy+/-0.002
              pH Cal PointsUp to 5 points
              pH Buffer SetsUSA, NIST
              Memory Data100 data sets
              Voltage9 V DC adapter
              Current3.3 A (100/240 VAC, SMPS)
              DimensionL17.5xW15.5xH6.9 cm
              Weight650 g
              Box SizeL30.8xW23.5xH12.4 cm
              Box Weight1800 g

              pH / Ion / mV-Redox-ORP / Temperature
              Ion-selective electrode measurement has never been this easy - or economical.The Ion 700 measures and records up to 100 data points with 0.01 resolution.
              • Meter accepts pH, Redox or Ion selective electrodes - it's like having three meters in one!
              • Large, easy-to-read display
              • Direct Ion concentration measurement - use with many different Ion-selective electrodes
              • Up to 5-point calibration with auto-buffer recognition
              • Non-volatile memory holds up to 100 data points
              • Integral electrode holder

              Applications
              • Educational Useful for most laboratory, ecological studies and other applications.
              • Laboratory Environmental studies, chemical labs, titrations and quality assurance testing. Use in all types of food processing.

              Specifications

              ORPRange+-1999 mV
              Rel. mV Range+-1999 mV
              Resolution0.1 mV (+-199.9 mV) / 1 mV (beyond)
              Accuracy+-0.2 mV (+-199.9 mV) / +-2 mV (beyond)
              IonConcentration0.01 to 2000 ppm
              Resolution (ppm)0.01 (<1); 0.1 (1.0 to 199.9); 1 (>200)
              Accuracy+-0.5 % full scale (monovalent) +-1.0 % full scale (divalent)
              Cal. PointsFrom 2 to 5 consecutive points; 0.1, 1.0, 10.0, 100.0 or 1000.0 ppm
              TemperatureRange0.0 to 100.0 oC / 32.0 to 212.0 oF
              Resolution0.1 oC / 0.1 oF
              Accuracy+-0.5 oC / +-0.9 oF
              CompensationAutomatic or Manual (0 to 100 oC / 32 to 212 oF)
              CalibrationOffset in 0.1 o increments; offset range +- 5 oC / 9 oF
              Yes! I am Interested

              DO 700 Bench Top Meters

              REQUEST CALLBACK

              DO 700 Bench Top Meters
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Details:
              DO Range0 to 30.0 mg/L
              DO Resolution0.01 mg/L
              DO Accuracy+/-0.5 % full scale
              Salinity Correction Range0 to 50 ppt
              Salinity Correction Resolution450 to 825 mmHg
              Memory Data100 data sets
              Voltage9 V DC adapter
              Current3.3 A (100/240 VAC, SMPS)
              DimensionL17.5xW15.5xH6.9 cm
              Weight650 g
              Box SizeL30.8xW23.5xH12.4 cm
              Box Weight1800 g

              Dissolved Oxygen / Temperature
              Economical, user-friendly and accurate, the Eutech DO 700 is your ideal choice for routine applications in laboratories, productions plants and schools.
              • Dissolved Oxygen measurements in ppm, mg/L or % saturation
              • Accurate readings in varying conditions with Temperature, Salinity and Barometric Pressure Compensation
              • Large, easy-to-read display
              • Ready indicator let you know when readings are stable
              • Non-volatile memory holds up to 100 data points
              • Integral electrode holder

              Applications
              • Environmental studies
              • Wastewater and water treatment
              • Ecological studies
              • Education institutio

              Specifications

              % Saturation Of OxygenRange0 to 199.9 % ; 300 %
              Resolution0.1 % / 1 %
              Accuracy+-0.5 % full scale
              Barometric Pressure CorrectionRange450 to 825 mmHg
              Resolution1
              AccuracyManual input
              MethodGalvanic
              TemperatureRange0.0 to 100.0 oC / 32.0 to 212.0 oF
              Resolution0.1
              Accuracy+- 0.5 o C / +- 0.9 o F
              Yes! I am Interested

              Ph Testr20 Waterproof Tester

              REQUEST CALLBACK

              Ph Testr20 Waterproof Tester
              Ask for Price

              Thanks for Contacting Us.

              Product Price :Get Latest Price

              Product Details:
              SensorDouble-junction, Ag/AgCl system with polymer gel
              DimensionTester: 16.5x3.8 cm, Boxed: 22x6x5 cm
              WeightTester: 90 g, Boxed: 170 g
              Auto OffAfter 8.5 minutes from last key press
              User ResetYes
              Non Volatile Memory BackupYes
              LCD DisplayDual
              Power Requirement4 x 1.5V "A 76" micro Alkaline Batteries
              Battery LifeMore than 500 hrs
              Operating Temperature0 - 50 Deg C

              Features
              • Large Display Screen
              • Microprocessor Based
              • User replaceable Double
              • Junction, Polymer Sensor
              • 3-point (USA or NIST) Push
              • Button Calibration with
              • Buffer Recognition
              • Simultaneous Temperature
              • Display in DegreeC or DegreeF
              • (pH Tester 30)
              • Automatic Temperature
              • Compensation
              • Self Diagnostic Messages
              • Non-Volatile Memory
              • Hold and Auto-off
              • Functions

              Large Display Screen

              • Large dual-display LCD for enhanced readability. Important meter functions such as mode, ATC, battery level and temperature (pH 30 only)are clearly displayed for your convenience, at all times.


              Temperature Display

              • pH 30 displays both the pH and temperature values, simultaneously. pH is displayed on the top of the screen, while temperature is on the secondary display. You can choose to read temperature in o C or o F.


              Calibration Buffer Sets

              • Choose either the USA (pH 4.01, pH 7.00 and pH 10.01) or NIST (pH 4.01, pH 6.86 and pH 9.18) buffer sets.


              Push-Button Calibration With Buffer Recognition

              • Calibration is quick and easy with simple two-button operation. In the calibration mode, your pocket tester auto-detects and displays buffer value in the lower display, thus minimizing calibration errors. Three-point calibration ensures accuracy across the pH Scale. Reset calibration data to factory default setting whenever sensor is replaced.


              User-Replaceable Double-Junction Sensor

              • Replace the sensor yourself! No tools or messy soldering is necessary. Sensors are equipped with a double-junction construction minimizing reference element poisoning. Spare sensors are supplied separately.


              Non-Volatile Memory

              • Your calibration data is safe when you power-off or change the batteries. EEPROM retains all the vital information.


              Auto-Power Off

              • Meter automatically powers-off after 8.5 minutes of non-use to conserve battery life and save you money.


              Hold Function

              • Hold measured values for later reading and recording, especially useful when you are in dimly lit and confined areas.

              Specifications

              pH Range-1.00 to 15.00
              Resolution0.01 pH
              Relative Accuracy+-0.01 pH
              Calibration Up to 3 pointsYes
              Calibration Buffer optionUSA- 4.01/7.00/10.01 NIST- 4.01/6.86/9.18
              Automatic Temperature Compensation (ATC)Yes
                Yes! I am Interested

                TDS Tester

                REQUEST CALLBACK

                TDS Tester
                Ask for Price

                Thanks for Contacting Us.

                Product Price :Get Latest Price

                Product Brochure
                Product Details:
                Temperature DisplayYes
                Operating Temperature0 to 50 Deg C
                ATC0 to 50 Deg C
                Temperature Coefficient2% per Deg C
                Normalization Temperature25.0 Deg C
                Auto Off8.5 Minutes after last key pressed
                Non Volatile MemoryYes
                LCD DisplayH2.7xW2.1 cm
                WeightTester: 90 g, Boxed: 170 g
                Power4 x 1.5 V "A76" Micro alkaline battery More than150 Hours
                DimensionTester: 16.5x3.8 cm, Boxed: 22x6x5 cm

                Introducing Eutech's new Waterproof TDS Testers, TDSTestr11 and TDSTestr11+, now with more features, giving you greater value for money. With newly-added functions such as simultaneous temperature readouts, the TDSTestr11 series now measures a wider range of total dissolved solids (TDS) from pure water to waste water. Original signature features of the Eutech TDS Testers, such as adjustable TDS factor, automatic temperature compensation and manual calibration, are retained, giving you accurate.

                Features
                • +-1% Full Scale Accuracy
                • Selectable TDS Factor (0.40 to 1.00)
                • Automatic Temperature Compensation (ATC)
                • Single & Multi-Point Calibration
                • Large Dual-Display Screen
                • Simultaneous Temperature Display
                • Non-Volatile
                • Replaceable Sensors
                • Advanced Power Management
                • Expanded Range to Measure in More Media

                Greater Convenience with Dual & Multi Range Testers

                The dual range ECTestr11 comes in two ranges - 0 to 2000 uS/cm and 0 to 20.00 mS/cm; while the multi-range ECTestr11+ measures up to three ranges - 0 to 200.0 uS/cm; 2000 uS/cm and 20.00 mS/cm. All models are equipped with selectable or auto-ranging capabilities and provide direct readouts for easy testing on-the-go.

                Higher Accuracy with Multi-Point Calibration

                Choose either automatic or manual calibration mode to suit your calibration standards. Customize the calibration settings according to your measurement needs, or simply use the convenient single-point calibration for basic testing requirements.

                Lower Operating Costs with User-Replaceable Sensors & Auto Power-Off Feature

                Sensor replacement is easy and user-friendly with the convenient screw cap design. Tester body is reusable, providing additional cost savings in the long run. In addition, your tester automatically shuts off after 8.5 minutes of inactivity to conserve battery life. Advanced power management design ensures batteries last
                more than 150 hours.

                Wide Applications with Innovative Sensor Design

                The unique cup style sensor of ECTestr11+ is perfect for micro sample measurements. Dip-type sensor is available also for dual range models. Valox sensor casing with industrial grade SS316 stainless steel sensor element protects against harsh sample and ensures superior chemical durability for most of your applications.

                Rugged Waterproof, Anti-Roll Design

                Unique anti-roll ribbed design ensures firm grip. Even if accidentally dropped into water, the ECTestr11 series is waterproof to IP67 standards, and floats for easy retrieval.

                Applications

                • Water & wastewater treatment
                • Boiler blow-down
                • Electroplating rinse tanks
                • Drinking water
                • Hydroponics
                • Printing Industry
                • Aquaculture
                • Aquariums & fish farms
                • Swimming pools

                Specifications

                Large Screen Conductivity TestersECTestr11ECTestr11+
                Range0 to 2000 uS/cm,0 to 20.00 mS/cm0 to 200.0 uS/cm,0 to 2000 uS/cm 0 to 20.00 mS/cm
                Resolution10 uS/cm 0.10 mS/cm0.1 uS/cm; 1 uS/cm 0.01 mS/cm
                Calibration Points (Auto)2(1413 uS/cm 12.88 mS/cm)3(84.0 uS/cm, 1413 uS/cm, 12.88 mS/cm)
                Calibration Points (Manual)2 (One per range)3 (One per range)
                  Yes! I am Interested

                  Waterproof PH Tester

                  REQUEST CALLBACK

                  Waterproof PH Tester
                  • Waterproof PH Tester
                  • Waterproof PH Tester
                  • Waterproof PH Tester
                  Ask for Price

                  Thanks for Contacting Us.

                  Product Price :Get Latest Price

                  Product Brochure
                  Product Details:
                  SensorDouble-junction, Ag/AgCl system with polymer gel
                  DimensionTester 16.5x3.8 cm, Boxed 22x6x5 cm
                  WeightTester 90 g, Boxed 170 g
                  Auto OffAfter 8.5 minutes from last key press
                  User ResetYes
                  Non Volatile Memory BackupYes
                  LCD DisplayDual
                  Power Requirement4 x 1.5V "A 76" micro Alkaline Batteries
                  Battery LifeMore than 500 hrs
                  Operating Temperature0 - 50 Deg C

                  We offer enhanced quality ph meter with the accuracy. The Calibration is quick and easy with simple two-button operation. Following are the features of waterproof pH meter

                  Features
                  • Large Display Screen
                  • Microprocessor Based
                  • User replaceable Double Junction, Polymer Sensor
                  • Automatic Temperature Compensation
                  • Self Diagnostic Messages
                  • Non-Volatile Memory
                  • Hold and Auto-off Functions

                  Large Display Screen

                  • Large dual-display LCD for enhanced readability. Important meter functions such as mode, ATC, battery level and temperature (pH 30 only)are clearly displayed for your convenience, at all times.


                  Temperature Display

                  • pH 30 displays both the pH and temperature values, simultaneously. pH is displayed on the top of the screen, while temperature is on the secondary display. You can choose to read temperature in o C or o F.


                  Calibration Buffer Sets

                  • Choose either the USA (pH 4.01, pH 7.00 and pH 10.01) or NIST (pH 4.01, pH 6.86 and pH 9.18) buffer sets.


                  Push-Button Calibration With Buffer Recognition

                  • Calibration is quick and easy with simple two-button operation. In the calibration mode, your pocket tester auto-detects and displays buffer value in the lower display, thus minimizing calibration errors. Three-point calibration ensures accuracy across the pH Scale. Reset calibration data to factory default setting whenever sensor is replaced.


                  User-Replaceable Double-Junction Sensor

                  • Replace the sensor yourself! No tools or messy soldering is necessary. Sensors are equipped with a double-junction construction minimizing reference element poisoning. Spare sensors are supplied separately.


                  Non-Volatile Memory

                  • Your calibration data is safe when you power-off or change the batteries. EEPROM retains all the vital information.


                  Auto-Power Off

                  • Meter automatically powers-off after 8.5 minutes of non-use to conserve battery life and save you money.


                  Hold Function

                  • Hold measured values for later reading and recording, especially useful when you are in dimly lit and confined areas.


                  Specifications

                  Large Screen TesterspHTestr10pHTestr30
                  pH Range-1.0 to 15.0-1.00 to 15.00
                  Resolution0.1 pH0.01 pH
                  Relative Accuracy+-0.1 pH+-0.01 pH
                  Calibration Up to 3 pointsYes
                  Calibration Buffer optionUSA- 4.01/7.00/10.01 NIST- 4.01/6.86/9.18USA- 4.01/7.00/10.01 NIST- 4.01/6.86/9.18
                  Automatic Temperature Compensation (ATC)Yes
                  Temperature Display
                  0-50.0 DegreeC or 32.0-122.0 DegreeF
                  Temp Resolution
                  0.1 DegreeC / DegreeF
                  Temp Accuracy
                  0.5 DegreeC / 0.9 DegreeF
                  Temp Calibration Window
                  +/- (5 DegreeC /9 DegreeF) from default value
                  Yes! I am Interested

                  Con 700 Bench Top Meters

                  REQUEST CALLBACK

                  Con 700 Bench Top Meters
                  Ask for Price

                  Thanks for Contacting Us.

                  Product Price :Get Latest Price

                  Product Details:
                  TDS Range100 ppt @ 0.5 TDS factor (to 200 ppt @ 1.0 TDS factor)
                  TDS Resolution0.01 ppm; 0.1 ppm ; 1 ppm ; 0.01 ppt ; 0.1 ppt
                  TDS Accuracy+/- 1 % full scale
                  TDS Cal PointsUp to 5 points
                  TDS Factor0.40 to 1.00 (adjustable)
                  Memory Data100 data sets
                  Voltage9 V DC adapter
                  Current3.3 A (100/240 VAC, SMPS)
                  DimensionL17.5xW15.5xH6.9 cm
                  Weight650 g
                  Box SizeL30.8xW23.5xH12.4 cm
                  Box Weight1800 g

                  Conductivity / Total Dissolved Solids / Temperature
                  The economy Eutech CON 700 offers years of reliable, accurate and consistent performance. User-friendly features make the instrument an ideal research partner in laboratories, productions plants and schools.
                  • Large screen that displays Conductivity or TDS readings with Temperature in oC or oF
                  • Ready indicator let you know when readings are stable
                  • Selectable cell constant
                  • Auto-ranging across 5 Conductivity and TDS ranges
                  • Up to 5-point push button calibration
                  • Non-volatile memory holds up to 100 data points
                  • Integral electrode holder

                  Applications
                  • Environmental studies
                  • Chemical laboratories
                  • Quality assurance testing
                  • Food science
                  • Ecological studies
                  • Education institution

                  Specifications

                  ConductivityRange.. S/cm to 200.0 mS/cm
                  Resolution0.01 S; 0.1 S ; 1 S ; 0.01 mS ; 0.1 mS
                  Accuracy+-1 % full scale
                  Cal. PointsAutomatic (4 points); maximum 1 per range; manual (5 points); maximum 1 per range
                  Cell Constant0.1, 1.0, 10.0 (selectable)
                  TemperatureRange (Meter)0.0 to 100.0 oC / 32.0 to 212.0 oF
                  Resolution0.1 o C
                  Accuracy+- 0.5 C / +- 0.9 o F
                  Coefficient (Per oC)0.00 to 10.00 %
                  Normalization15.0 to 30.0 oC (adjustable)
                  Compensation Type & RangeAutomatic with supplied cell or manual 0.0 to 100 oC / 32.0 to 212.0 oF, 0 to 80 oC / 32.0 to 176.0 oF with supplied cell
                  CalibrationOffset in 0.1 o increments; offset range +- 5 oC / 9 oF
                  Yes! I am Interested

                  PC 700 Bench Top Meters

                  REQUEST CALLBACK

                  PC 700 Bench Top Meters
                  Ask for Price

                  Thanks for Contacting Us.

                  Product Price :Get Latest Price

                  Product Details:
                  pH Range-1.99 to 16.00 pH
                  pH Resolution0.01 pH
                  pH Accuracy+/-0.002
                  pH Cal PointsUp to 5 points
                  pH Buffer SetsUSA, NIST
                  Memory Data100 data sets
                  Voltage9 V DC adapter
                  Current3.3 A (100/240 VAC, SMPS)
                  DimensionL17.5xW15.5xH6.9 cm
                  Weight650 g
                  Box SizeL30.8xW23.5xH12.4 cm
                  Box Weight1800 g

                  pH / mV-Redox-ORP / Conductivity / Total Dissolved Solids / Temperature

                  The multi-parameter Eutech PC 700 measures pH, ORP, conductivity and temperature with a single meter. User-friendly with advanced features and a large custom-size display - perfect for research work on a budget!
                  • Large screen in a compact footprint
                  • Meter accepts pH and Redox electrodes, in addition to Conductivity/TDS -it's like having four meters in one!
                  • Up to 5-point push button calibration
                  • Selectable cell constant
                  • Auto-ranging across 5 Conductivity ranges
                  • Easy interchangeability of probes
                  • Non-volatile memory holds up to 100 data points
                  • Integral electrode holder

                  Applications
                  • Water quality testing
                  • Checking metal finishes
                  • Solutions
                  • Cooling tower water
                  • Printing fountain solutions
                  • Boiler water
                  • Brines
                  • Drilling mud
                  • Rinse tanks
                  • Ponds
                  • Pollution control
                  • Recirculating systems
                  • Waste water
                  • Industrial process systems
                  • General use in laboratories
                  • Titration
                  • Quality assurance
                  • Ecological studies
                  • Food-processing

                  Specifications

                  ORPRange+-1999 mV
                  Rel. mV Range+-1999 mV
                  Resolution0.1 mV (+-199.9 mV) / 1 mV (beyond)
                  Accuracy+-0.2 mV (+-199.9 mV) / +-2 mV (beyond)
                  ConductivityRange.. S/cm to 200.0 mS/cm
                  Resolution0.01 S; 0.1 S ; 1 S ; 0.01 mS ; 0.1 mS
                  Accuracy+-1 % full scale
                  Cal. PointsAutomatic (4 points); maximum 1 per range; manual (5 points); maximum 1 per range
                  Cell Constant0.1, 1.0, 10.0 (selectable)
                  TDSRange.. to 100 ppt @ 0.5 TDS factor (to 200 ppt @ 1.0 TDS factor)
                  Resolution0.01 ppm; 0.1 ppm ; 1 ppm ; 0.01 ppt ; 0.1 ppt
                  Accuracy+- 1 % full scale
                  Cal. PointsUp to 5 points
                  TDS Factor0.40 to 1.00 (adjustable)
                  TemperatureRange (Meter)0.0 to 100.0 oC / 32.0 to 212.0 oF
                  Resolution0.1 o C / 0.1 o F
                  Accuracy+- 0.5 o C / +- 0.9 o F
                  Coefficient (Per oC)0.00 to 10.00 %
                  Normalization15.0 to 30.0 oC (adjustable)
                  Compensation Type & RangeAutomatic with supplied cell or manual 0.0 to 100 oC / 32.0 to 212.0 oF, 0 to 80 oC / 32.0 to 176.0 oF with supplied cell
                  CalibrationOffset in 0.1 o increments; offset range +- 5 oC / 9 oF
                  Yes! I am Interested

                   
                  X


                  Explore More Products

                  Contact via E-mail
                  Contact via SMS
                  Bharat Bist (Partner)
                  Lab Sales Corporation
                  1053, Phatak Muftiwalan, Tiraha Behram Khan, Dariya Ganj
                  New Delhi - 110002, Delhi, India
                  Call Us: 
                  Call Response Rate: 64%
                  Share Us :



                  Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

                  © Lab Sales Corporation. All Rights Reserved (Terms of Use)
                  Developed and Managed by IndiaMART InterMESH Limited

                  Lab Sales Corporation